Panasonic FZ-G1 Series Operating Instructions Manual page 39

Display
During Simultaneous
display, one of the
screens becomes disor-
dered.
The external display
does not work normally.
Cannot rotate the dis- he dis-
play.
Screen
The pointer does not
work.
Cannot point the cor-
rect position using the
included digitizer pen.
Cannot display "Charm"
"Charm".
On-screen Document
The document of PDF
format is not displayed.
When using the Extended Desktop, use the same display colors for the
external display as those used by the LCD. If you continue to experi-
ence problems, try changing the display.
Touch and hold on the desktop, and touch
Simultaneous display cannot be used until Windows startup is com-
plete (during Setup Utility, etc.).
If the external display does not support the power saving function, it
ly. may not work normally when the computer enters the power saving
mode. Turn off the external display.
T T h The application program currently running may not support the image
rot rotati rotation. Quit the program, and then try to rotate the image. This can
am amelior ameliorate the status.
When the automatic rotation is off, screen display does not rotate auto- W W hen the a hen the a
matically. matically. matically.
When us When using When using the external mouse, connect it correctly. the externa
Restart the compute Restart the computer usin Restart the computer using the external keyboard/mouse.
If the computer does not res If the computer does not respond to external keyboard/mouse com- omputer doe
mands, read "No response" mands, read "No response" s, read "No
( ( page 40). page age 40). 4
Perform the screen calibration ( rform the screen calibration ( orm the screen calibration
Operation" ). ration" ). ration" ).
Use the included pen. e inclu e included pen. ded pen.
On the Windows logon screen or the Welcome screen, you may not be ndows logon scre
able to point the correct position using the included digitizer pen. Use the correct position using the includ
the external keyboard or the external mouse to log on.
Delete the calibration data.
A
B
Install Adobe Reader.
A Log on to Windows as an administrator.
B Touch (Start) and input "
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Read-
er and touch
exte
gon screen or the Welcom e Welcom
ct position using the inclu
yboard or the external mouse to log d or the external mouse to log
on da on data.
Enter .
Reference Manual "Screen Input
tor. r.
-
39