Panasonic FZ-G1 Series Operating Instructions Manual page 33

NOTE
To change OS from 32-bit to 64-bit, or vice versa, install OS using the recovery
Preparation
about the products available)
Remove all peripherals (except for the USB DVD drive).
Connect the AC adaptor and do not remove it until installation is complete.
NOTE
You can use the following buttons instead of the keyboard. e the following butt e the following bu
Preparation
about the products available)
Remove all peripherals (except for the USB DVD drive).
Connect the AC adaptor and do not remove it until installation is complete.
1 Connect the DVD drive to the USB port.
2 Start the Setup Utility.
A Display "Charm", and touch
B
C
displayed.
left of the screen.
If the password is requested, enter the Supervisor Password.
3 Write down all of the contents of the Setup Utility and touch [Exit] and
double-touch [Load Default Values].
4 Check the [UEFI Boot] setting of the Setup Utility.
Reference Manual "Recovery Disc Creation Utility")
AC AC
Reference Manual Reference Manual "Recovery Disc Creation Utility") ference Ma
s available) lable
s (except for the USB DVD drive) (except for the USB DVD
and do not remove it un and do not remove it until installat
o the USB port o the USB port.
l "Re
-
33