Panasonic FZ-G1 Series Operating Instructions Manual page 32

Installing Software
7
Touch [Next] and touch [YES].
Touch [Reinstall Windows] and touch [Next].
8 At the License Agreement screen, touch [Yes, I agree to the provisions
above and wish to continue!] and touch [Next].
9 Touch [Next].
Select this option when you want to install Windows to the factory default. After instal-
lation, you can create a new partition. For how to create a new partition, refer to "To
change the partition structure" ( nge the par nge the par
a a nd you want to keep t and you want to keep the partition structure. For how to create a new partition, refer to "To nd you want to k
change the partition structure" ( change the partition struc change the partiti
*1 *1
This does not appear if Windo This does not appear if Windows cannot be installed to the recovery partition and the area usable by
Windows. Windows. s.
10
11
Installation starts according to the instructions on the screen. (It will take approximately
20 minutes.)
Do not interrupt installation, for example by turning off the computer or performing other
operation.
Otherwise installation may become unavailable as Windows may not start up or the
data may be corrupted.
13 When Ending process screen is displayed, touch [OK] to turn off the
computer.
14 Turn on the computer.
If the password is requested, enter the Supervisor Password.
15 Perform the "First-time Operation" (
NOTE
them correctly.
16 Start the Setup Utility and change the settings as necessary.
17 Perform Windows Update.
18
Using Recovery Disc
Use the Recovery Disc in the following conditions.
You have forgotten the administrator password.
To change OS from Windows 7 to Windows 8.1, or vice versa.
32
ystem
his his
you ca you c
not appear if Wind
Select OS (32-bit or Select OS (32-bit or 64-bit) and touch [OK]. lect OS (32-bit o
starts according to the instruction starts according to the ins
upt installation allati , for example by tur
ation may become unavailable as on may become unavaila
ted. ted.
ss screen is displayed, tou ss screen is displayed, tou
The date and time, and the time zone may not be correct. Be sure to set
<Only for model with TPM> Clear TPM (
<Only for Windows 7 downgrade model>
page @@).
*1
ash memory has already been divided into several partitions
page @@).
ple by tu
ter the Supervisor Password. er the Supervisor Password.
ation" ( ation" ( page page @@). age @@).
time zone may not be correct. Be
ttings as necessary.
@
orrect. Be
as nec
TP TPM ( p page @@).