Panasonic FZ-G1 Series Operating Instructions Manual page 36

Troubleshooting (Basic)
Starting Up
Windows startup and
operation is slow.
The date and time are
incorrect.
appears.
not appear when resum-
ing from sleep/hiberna-
tion.
36
Start the Setup Utility (
return the Setup Utility settings (excluding the passwords) to the de-
fault values. Start the Setup Utility and make the settings again. (Note
that the processing speed depends on the application software, so this
procedure may not make Windows faster.)
If you installed a resident software after purchase, turn off the resi-
dence.
Make the correct settings.
A Open the Control Panel.
1. Perform either of the following procedures.
Touch and hold
screen.
Flick from the middle of the Start screen to the top.
Touch Touch Touch
B B B
If the problem persists, the internal clock battery may need to be re- If the problem If the problem per
placed. Contac placed. Contact Pan placed. Contact Panasonic Technical Support (
When the computer is When the computer is connected to LAN, check the date and time of When the com
the server. the server. he server.
The 2100 A.D. or later year The 2100 A.D. or later year w The 2100 A.D. or later year will not be correctly recognized on this
computer. computer. com
The Battery Recalibratio The Battery Recalibration was canceled before Windows was shut The Battery Recalibration was can
down last time. To start up Windows, turn off the computer by the own last time. To start up Windows, own last time. To start up Windows,
power switch, and then turn on. er switch, and then turn on. and then turn on.
the Setup Utility ( Utility ( y (
The Windows password can be used instead of the password set in password can be used instead of t password can be used instead of t
the Setup Utility.
A Add a password. d d
1. Display "Charm" and touch
1. Touch
B Set up the following.
1. Open the Control Panel, touch
1. T
Reference Manual "Setup Utility") to
at the bottom left corner of the Desktop
Reference Manual "Se Reference Manual Reference Manual "Setup Utility"). l l "Se
nd touch
page 50).