Panasonic FZ-G1 Series Operating Instructions Manual page 26

Handling and Maintenance
Automatic brightness adjustment
The computer is equipped with an automatic brightness adjustment function that adjusts the
function as follows.
A Display "Charm" and touch
A Touch
B
C
D
Set each item to ON, and the brightness of the screen display will adjust automatically. ach item to ON ach item to ON,
The ambient light sensor is located at the top of LCD. mbien mbient light sensor i
The ambient light cannot be detected properly if this area is obstructed or dirty. e ambien e amb t light cannot be
Magnetic sensor Magnetic sensor Magnetic sensor
The magnetic sensor on the computer operates by detecting geomagnetism. Therefore, the e magne e magnetic sensor on the compute tic sensor on the compute
magnetic sensor may not function properly and it readings may be inaccurate, especially in etic sensor may not function prope etic sensor may not function prope
the following environments. wing environments.
Inside or near steel structures such as buildings or bridges near steel structures such as build
Inside or near automobiles, or near train power lines
Near metallic furniture or appliances
When the AC adaptor or other peripheral devices are brought closer to the computer
The magnetic directions indicated by the magnetic sensor may not be accurate immediately
In such cases, turn on the computer and move it as follows.
A Hold the computer so that its screen side is facing upward and level.
B While keeping the computer level, rotate it 90 degrees or more clockwise.
C Return the computer to position A, and rotate it 90 degrees or more counterclockwise.
D Return the computer to position A.
E Tilt the computer 90 degrees or more to the left so that the left side of the computer tilts
down.
F Return the computer to position A, and tilt it 90 degrees or more to the right so that the
right side of the computer tilts down.
CAUTION
result in damage.
ing steps.
A Touch
B Add the check mark for each check box.
C
26
enso
nno
nments.
steel structures such as
ar automobiles, or near train powe r automobiles, or near tra
urniture or appliances urniture or appliances
ptor or other peripheral devices ar other peripheral devices a
ndicated by the magnetic ndicated by the magnetic sensor
mputer and move it as foll
screen side is facing u
If the sensors do not works correctly, check the settings according to the follow-
d move ows. ws.
de is facing upward and l pward and
l, rotate it 90 degrees or more clo ate it 90 degrees or more clo
and rotate it 90 degrees or more and rotate it 90 degrees or more c
he left so that the left side of the c he left so that the left side of the c
0 degrees or more to the right so t o the right so
ettings a