Network Interfaces; Configuring An Ethernet Connection - Avaya S8500 User Manual

•
Factory settings string [default: AT&FO^M]: Type the initalization string to return the modem
to factory settings.
•
Auto answer [default: ATSO=3^M]: Type the initialization string to tell the modem to answer
an incoming call after three rings.
•
Escape string [default: +++AT^M]: Type the initialization string to return the modem to a
command mode state when the modem is busy.
•
Auto answer stop [default: ATSO=O^M]: Type the initialization string to tell the modem to
stop answering the phone when it rings.
•
Caller ID string [default: no default]: Type the initialization string that will be used to collect
caller ID information from the incoming call.
•
Escape guard [default: 2.5 seconds]: Type the length of time before and after the escape string is
issued to the modem.
2
Click Save to save your changes.

Network interfaces

From the Network Interfaces window, you can:
•
Set up an Ethernet connection.
•
Set up a PPP over serial port connection.

Configuring an Ethernet connection

To configure an Ethernet connection:
1
In the navigation pane, select Network Interfaces under the ASM Control heading.
The Ethernet window appears (see
Figure 17: Network interfaces
Avaya Remote Supervisor Adapter User Guide
November 2003
Using the Avaya Remote Supervisor Adapter
Figure 17, Network interfaces,
Alerts
on page 41).
41