Setting Asm Information - Avaya S8500 User Manual

Figure 4: System settings
NOTE:
The RSA is shipped with recommended Avaya defaults. With write permissions on your
login ID, it is possible to change any default to customize your server. To save any
changes made to this section, scroll to the bottom of the page and click Save.

Setting ASM information

To set ASM information:
1
In the navigation pane, select System Settings under the ASM Control heading.
The System Settings window appears.
2
Name [default: 1000000000]: This required field must contain the product ID associated with the
S8500 Media Server in this location. Avaya Services uses the product ID to identify the RSA and
associated S8500 Media Server.
3
ID Number [default: 100000000]: Type an ID number that will be used to identify the S8500
Media server. This information will be part of the SNMP trap.
4
Contact [default: no contact configured]: An optional field that contains the name of the person
responsible for this server at this location. You can enter a maximum of 47 characters in this field.
5
Location [default: no location configured]: An optional field that contains the address of the
location where the server resides. You can enter a maximum of 47 characters in this field.
6
Scroll to the bottom of the page and click Save.
Avaya Remote Supervisor Adapter User Guide
November 2003
Using the Avaya Remote Supervisor Adapter
ASM control
25