Network Interfaces; Configuring An Ethernet Connection - Avaya Remote Supervisor Adapter User Manual

Avaya remote supervisor adapter for use with avaya s8500 media server
Table of Contents

Advertisement

Modem query
connected.
Factory settings string
to factory settings.
Auto answer
an incoming call after three rings.
Escape string
mode state when the modem is busy.
Auto answer stop
stop answering the phone when it rings.
Caller ID string
caller ID information from the incoming call.
Escape guard
is issued to the modem.
2
Click Save to save your changes.

Network interfaces

From the Network Interfaces window, you can:
Set up an Ethernet connection.
Set up a PPP over serial port connection.

Configuring an Ethernet connection

To configure an Ethernet connection:
1
In the navigation pane, select Network Interfaces under the ASM Control heading.
The Ethernet window appears.
Avaya Remote Supervisor Adapter User Guide
June 2004
[default: AT^M]: Type the initialization string to be used to tell if the modem is
[default: AT&FO^M]: Type the initalization string to return the modem
[default: ATSO=3^M]: Type the initialization string to tell the modem to answer
[default: +++]: Type the initialization string to return the modem to a command
[default: ATSO=O^M]: Type the initialization string to tell the modem to
[default: no default]: Type the initialization string that will be used to collect
[default: 2.5 seconds]: Type the length of time before and after the escape string
Using the Avaya Remote Supervisor Adapter
Alerts
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rsa

Table of Contents