Avaya S8500 User Manual page 38

Using the Avaya Remote Supervisor Adapter
Alerts
Setting local events
To set the events:
1
In the navigation pane, select Event Log under the Monitors heading.
The Monitored Local Events window appears (see
38).
Figure 15: Monitored local events
See Table 6, Monitored local events,
Table 6: Monitored local events 1 of 2
Event
Event log 75% full
Event log full
Redundant power supply
failure
Voltage irregularity
Power off
38
on page 38 for an explanation of monitored local alerts.
Action
[default: Enabled]: Generates an event if the event log reached 75% of
capacity.
[default: Enabled]: Generates an event if the event log reaches capacity.
When the event log reaches capacity, the oldest entries in the log are
deleted by new entries.
Not used on the S8500 Media Server configuration.
[default: Enabled]: Generates an event if the monitored voltages exceed
their thresholds.
[default: Enabled]: Generates an event if the power to the S8500 Media
Server is turned off.
Avaya Remote Supervisor Adapter User Guide
Figure 15, Monitored local events, on page
1 of 2
November 2003