Conventions; General; Physical Dimensions; Typography - Avaya S8500 User Manual

Conventions

This section describes the conventions that we use in this book.

General

We show commands and screens from the newest Avaya system and see the most current books. You
must substitute the appropriate commands for your system and see the books that you have available.

Physical dimensions

•
All physical dimensions in this book are in English units followed by metric units in parentheses.
•
Wire gauge measurements are in AWG followed by the diameter in millimeters in parentheses.

Typography

This section describes the typographical conventions for commands, keys, user input, system output, and
field names.

Commands

•
Commands are in bold type.
Example
Type change-switch-time-zone and press Enter.
•
Command variables are in bold italic type when they are part of what you must type, and in plain
italic type when they are not part of what you must type.
Example
Type ch ma machine_name, where machine_name is the name of the call delivery machine.
•
Command options are in bold type inside square brackets.
Example
At the DOS prompt, type copybcf [-F34].

Keys

•
The names of keys are in bold sans serif type.
Example
Use the Down Arrow key to scroll through the fields.
•
When you must press and hold a key and then press a second or third key, we separate the names
of the keys are separated with a plus sign (+).
Example
Press ALT+D.
Avaya Remote Supervisor Adapter User Guide
November 2003
About this book
Conventions
11
555-245-702