hwc_vnsconfiguration.fm
Virtual Network configuration
Bridging traffic locally
To bridge traffic locally:
1.
From the main menu, click Virtual Network Configuration. The Virtual Network
Configuration screen appears.
2.
In the left pane Virtual Networks list, click the VNS that you want to define topology
parameters for.
3.
Click the Topology tab.
4.
In the VNS Mode drop-down list, click Bridge Traffic Locally at AP to enable branch office
mode.
5.
To define the VLAN Setting, select one of the following:
Tagged
●
Untagged
●
If you select Tagged, type the VLAN ID in the VLAN ID box. The default value is 1.
186
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
A31003-W1040-U101-1-7619, July 2006 DRAFT