Siemens HiPath C10 User Manual page 100

hwc_apstartup.fm
Configuring the wireless AP
Configuring APs simultaneously
3. In the Wireless APs list, select one or more APs to edit. To select multiple APs, select the
appropriate APs from the list while pressing the CTRL key.
When using multi-edit configuration, any box or option that is not explicitly
>
modified will not be changed by the update.
The Wireless APs shown in the Wireless APs list can be from any version of the
software. Attributes that are common between software versions are set on all
Wireless APs. Attributes that are not common, are only sent to the AP versions
to which the attributes apply. Attempting to set an attribute that does not apply
for an AP will not abort the multi-edit operation.
100
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
A31003-W1040-U101-1-7619, July 2006 DRAFT