Blacklisting A Client - Siemens HiPath C10 User Manual

hwc_ongoing.fm
Performing system maintenance
Performing wireless AP client management
3. In the Select AP list, click the AP you want to dissassociate.
4. In the Select Client(s) list, select the checkbox next to the client you want to disassociate,
if applicable.
You can search for a client by MAC Address, IP Address or User ID, by selecting
>
the search parameters from the drop-down lists and typing a search string in the
Search box and clicking Search. You can also use the Select All or Clear All
buttons to help you select multiple clients.
5. Click Disassociate. The client's session terminates immediately.
12.1.2

Blacklisting a client

The Blacklist tab displays the current list of MAC addresses that are not allowed to associate.
A client is added to the blacklist by selecting it from a list of associated APs or by entering its
MAC address.
242
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
A31003-W1040-U101-1-7619, July 2006 DRAFT