HP A5830 Series Command Reference Manual page 227

begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Example
# Display the global LLDP status as well as the LLDP status information of all ports.
<Sysname> display lldp status
Global status of LLDP: Enable
The current number of LLDP neighbors: 0
The current number of CDP neighbors: 0
LLDP neighbor information last changed time: 0 days,0 hours,4 minutes,40 seconds
Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port 1 [GigabitEthernet1/0/1]:
Port status of LLDP
Admin status
Trap flag
Polling interval
Number of neighbors
Number of MED neighbors
Number of sent optional TLV
Number of received unknown TLV : 5
Table 48 Command output
Field
Global status of LLDP
LLDP neighbor information last
changed time
Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port 1
Port status of LLDP
: 30s
: 4
: 2s
: 2s
: 5s
: 3
: Enable
: Tx_Rx
: No
: 0s
: 5
: 2
: 12
Description
Indicates whether LLDP is globally enabled
Time when the neighbor information was last updated
LLDPDU transmit interval
TTL multiplier
LLDP re-initialization delay
LLDPDU transmit delay
Trap transmit interval
Number of the LLDPDUs sent each time fast LLDPDU transmission is
triggered
LLDP status of port 1
Indicates whether LLDP is enabled on the port
220