Display Gvrp Status - HP A5830 Series Command Reference Manual

Example
# Display GVRP statistics for trunk port GigabitEthernet 1/0/1.
<Sysname> display gvrp statistics interface gigabitethernet 1/0/1
GVRP statistics on port GigabitEthernet1/0/1
Table 43 Command output
Field
GVRP Status
GVRP Running
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type

display gvrp status

Description
Use the display gvrp status command to display the global GVRP state.
Syntax
display gvrp status [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Example
# Display the global GVRP state.
GVRP Status
GVRP Running
GVRP Failed Registrations
GVRP Last Pdu Origin
GVRP Registration Type
Description
Indicates whether GVRP is enabled or disabled
Indicates whether GVRP is running
Indicates the number of GVRP registration failures
Indicates the source MAC address in the last GVRP PDU
Indicates the GVRP registration mode (fixed, forbidden, or
normal) on the port
: Enabled
: YES
: 0
: 0000-0000-0000
: Normal
194