Reset Garp Statistics - HP A5830 Series Command Reference Manual

[Sysname-GigabitEthernet1/0/1] gvrp registration fixed

reset garp statistics

Description
Use the reset garp statistics command to clear the GARP statistics on the specified ports. If no ports are
specified, this command clears the GARP statistics on all ports.
The cleared statistics include the statistics about GVRP PDUs sent, received, and dropped.
Related commands: display garp statistics.
Syntax
reset garp statistics [ interface interface-list ]
View
User view
Default level
2: System level
Parameter
interface interface-list: Clears the GARP statistics of one or multiple ports.
You can provide up to 10 port lists, specified in the following ways:
As an individual port in the form of interface-type interface-number
As a port range in the form of interface-type interface-number1 to interface-type interface-number2,
where the end-port number specified by interface-number2 must be greater than the start port
number specified by interface-number1.
Example
# Clear the GARP statistics on all ports.
<Sysname> reset garp statistics
200