Display Stp Root - HP A5830 Series Command Reference Manual

Revision level
Configuration digest :0x5f762d9a46311effb7a488a3267fca9f
Instance
0
1
2
# In PVST mode, display the effective MST region configuration information.
<Sysname> system-view
[Sysname] stp mode pvst
[Sysname] display stp region-configuration
Oper Configuration
Format selector
Region name
Revision level
Configuration digest :0x5f762d9a46311effb7a488a3267fca9f
Instance
0
1
2
Table 30 Command output
Field
Format selector
Region name
Revision level
Mode

display stp root

Description
Use the display stp root command to display the root bridge information of all MSTIs.
Syntax
display stp root [ | { begin | exclude | include } regular-expression ]
View
Any view
:0
Vlans Mapped
21 to 4094
1 to 10
11 to 20
:0
:hello
:0
Mode Vlans Mapped
default 3 to 4094
static 1
dynamic 2
Description
Format selector defined by the spanning tree protocol. The default value is
0 and the selector cannot be configured.
MST region name.
Revision level of the MST region, which can be configured by using the
revision-level command and defaults to 0.
MSTI mode:
Default—Default instance MSTI 0. In PVST mode, the spanning tree
feature is disabled.
Static—Static MSTI.
Dynamic—Dynamically-assigned MSTI, which only exists in PVST mode.
108