Directory
Create directory entries
Create a new directory entry
1. Press MENU/
2. Press q
or p
CID
/SELECT.
MENU
3. Press q
or p
CID
/SELECT.
4. Press
MENU
5. Use the dialing keys to enter a telephone number (up to 30
digits) when prompted.
Press q
•
CID
or right.
•
Press
MUTE
•
Press and hold
•
Press and hold
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing REDIAL/
then q
or p
CID
to locate the number. Press
6. Press
/SELECT to move on to the name. The display
MENU
shows Number already saved if the number is already in
the directory. You cannot save the same number twice.
7. Use the dialing keys to enter a name (up to 15 characters)
when prompted. Each time you press a key, the character
on that key appears. Additional key presses produce other
characters on that key. See the chart on the next page.
•
Press q
CID
or right.
•
Press 0 to add a space.
•
Press
MUTE
•
Press and hold
Press a>A to change the next letter to upper or lower case.
•
8. Press
/SELECT to store your new directory entry.
MENU
There is a confirmation tone and the screen shows Saved.
To change the entry later, see page 44.
NOTE: The first letter of every word is a capital letter. The remaining letters in a word start as
lower case letters, as shown in the chart on the next page.
in idle mode to enter the main menu.
SELECT
to scroll to >Directory, then press
DIR
to highlight >Add contact.
DIR
or p
to move the cursor to the left
DIR
/DELETE to erase a digit.
/DELETE to erase all digits.
MUTE
/PAUSE to enter a three-second
REDIAL
, or pressing REDIAL/
DIR
MENU
or p
to move the cursor to the left
DIR
/DELETE to erase a character.
/DELETE to erase all characters.
MUTE
repeatedly
PAUSE
/SELECT to copy the number.
39
Answering sys
>Directory
p
q
Review
>Add contact
p
q
ENTER NUMBER
888-883-2445 _
PAUSE,
ENTER NAME
Robert Brown_
Saved
Robert Brown
888-883-2445