Hardware And Software Requirements; Generating The Design - Intel Arria 10 series User Manual

®
1 Intel FPGA HDMI Design Example Quick Start Guide for Intel
UG-20077 | 2017.11.06
Folders
hdmi_rx
hdmi_tx
Table 3. Generated Software Files
Folders
tx_control_src
Note: The tx_control folder will also
contain duplicates of these files.

1.2 Hardware and Software Requirements

Intel uses the following hardware and software to test the design example.
Hardware
• Intel Arria 10 GX FPGA Development Kit
• HDMI Source (Graphics Processor Unit (GPU))
• HDMI Sink (Monitor)
• Bitec HDMI 2.0 FMC daughter card (Revision 4.0)
• HDMI cables
Software
• Intel Quartus Prime version 17.1 (for hardware testing)
• ModelSim* - Intel FPGA Edition, ModelSim - Intel FPGA Edition Starter Edition,
NCSim (Verilog HDL only), Riviera-Pro, or VCS/VCS-MX simulator

1.3 Generating the Design

Use the Intel FPGA HDMI parameter editor in the Intel Quartus Prime software to
generate the design examples.
Figure 3. Generating the Design Flow
Start Parameter
•
/hdmi_rx.qsys
•
/hdmi_rx.ip
/hdmi_rx.sopcinfo
•
/hdmi_tx.qsys
•
/hdmi_tx.ip
/hdmi_tx.sopcinfo
/i2c.c
/i2c.h
/main.c
/xcvr_gpll_rcfg.c
/xcvr_gpll_rcfg.h
Specify IP Variation
Editor and Select Device
Intel
® ®
Arria 10 Devices
Files
(Intel Quartus Prime Standard Edition)
(Intel Quartus Prime Pro Edition)
(Intel Quartus Prime Standard Edition)
(Intel Quartus Prime Standard Edition)
(Intel Quartus Prime Pro Edition)
(Intel Quartus Prime Standard Edition)
Files
Select
Design Parameters
®
FPGA HDMI Design Example User Guide for Intel
Specify Initiate
Example Design Design Generation
®
Arria 10 Devices
7