Table of Contents
Advertisement
Quick Links
How To Use This Manual
ATC6430M Mainboard
HOW TO USE THIS MANUAL
This manual is written in a user-friendly style. It would be
advisable for users to read it in an orderly sequence :
1. For Hardware Information:
Read COMPONENT LOCATION DIAGRAM, Page A: QUICK JUMPER &
CONNECTOR SETTING, Page B: Slot 1 and CPU Installation, Page C:
CONNECTORS AND JUMPERS DESCRIPTION and Page D:List of Packaging.
2. For Mainboard and System Features:
Read "Chapter 1 System Features" , and you will find helpful information
on mainboard and system features. Especially, when you want to do some
feature setup, detailed instructions are provided therein to help you through.
3. For CPU, Memory and Drivers Installation:
Read "Chapter 2 Installation" for your CPU, memory and application drivers
installation. Detailed instructions are provided to guide all kinds of users.
4. For BIOS Update and Setup:
Read "Chapter 3 Award BIOS Setup" for updating your mainboard BIOS and
setting up your BIOS Configuration.
5. For other Technical Support:
Read "APPENDIX A", fill and send the Request Form to your dealer for other
technical support.
The default settings on a mainboard is not necessarily what user expects. A
user-friendly manual would be the handiest assistant to help change the on-board
configuration or default setting. In case this manual cannot solve all your problems,
please ask your dealer for help and be sure the warranty on your system is still valid.
REMARK: Intel ® is a registered trademark of Intel Corporation.
All other brands and product names are registered trademarks of their respective companies
Advertisement
Table of Contents
Related Manuals for Intel ATC6430M
Summary of Contents for Intel ATC6430M
-
Page 1: How To Use This Manual
REMARK: Intel ® is a registered trademark of Intel Corporation. All other brands and product names are registered trademarks of their respective companies... -
Page 2: Table Of Contents
System Features............1 1-1 Introduction................1 1-2 System Specifications ..............2 1-3 Features Highlight.................3 1-3-1 Add-on Features for VGA in Intel 810.........4 1-3-2 Add-on Features for Audio...........4 1-3-3 AMR and AC'97 CODEC Controller........5 1-3-4 Software Power Off Control..........5 1-3-5 Modem Ring On..............6 1-3-6 SB-Link Sideband Signal.............6... - Page 3 Contents ATC6430 Mainboard 3-2-5 Power Management Setup..............27 3-2-6 PNP/PCI Configuration................31 3-2-7 PC Health Status ...................33 3-2-8 Frequency / Voltage Control..............34 3-2-9Load Fail-Safe Defaults................35 3-2-10 Load Optimized Defaults..............35 3-2-11SupervisorPassword/User Password............35 3-2-12Save & Exit Setup.................35 3-2-13Exit without Saving................35 Appendix A Technical Support Request Form...
-
Page 4: Chapter 1 System Features
CHAPTER 1 System Features 1-1 Introduction 6430M mainboard is designed to run with Intel 810 chipset to enhance the performance and extraordinary value of the Intel Celeron processor-powered PC. On the other hand, it is mounted with both Slot 1 and Socket 370 connector for users to make their CPU choice. -
Page 5: System Specifications
Two DIMM sockets on board supporting up to 512MB SDRAM. u PC-66 / PC-100 compatible. : I/O System u On-board Intel 810 Chipset for I/O Control: FW82810DC100 / FW82810E + FW82801AA. u Bus Frequency 66MHz/100MHz u 5 PCI slots on board, compliant with version 2.2 PCI Local Bus spec. - Page 6 ATC6430M Mainboard Chapter 1 System Features : BIOS Support: u Built-in VGA BIOS in Intel 810; and built-in Keyboard BIOS;. u AWARD BIOS in Intel 810, providing CMOS Setup Utilities: - Standard CMOS Features Setup for Date, Drives and VGA ;...
-
Page 7: Features Highlight
Chapter 1 System Features ATC 6430M Mainboard 1-3 Features Highlight 1-3-1 Add-on Features for VGA in Intel 810: : Integrated Graphics Controller 3D Hyper Pipelined Architecture. Full 2D H/W Acceleration. Motion Video Acceleration. : 3D Graphics Visual Enhancements Flat & Gouraud Shading. -
Page 8: Amr And Ac'97 Codec Controller
AMR (Audio/Modem Riser) slot is mounted on board to connect riser board with Audio and/or Modem CODEC (AMC/AC/MC Adapters). The AMR specification developed by Intel provides a mechanism for AC’97 codes to be on a riser card. To enable the onboard AC’97 CODEC, set JP9 pin 2-3 closed. And in such way, you can further plug a riser board with Modem CODEC to the AMR slot. -
Page 9: Modem Ring On
EMU8008 incorporates a pair of SB-Link request/grant sideband signals (PCPCIR EQN and PCPCIGNTN) to interface to the PCI bus. SB-Link is a mechanism that was defined and developed by Intel as a docking solution which allows ISA slots to exist in docking stations connected to desktop PC PCI bus. -
Page 10: Ultra Dma 66 Cable(Optional)
If the Secure ON feature has been enabled, the password added to the Magic Packet is also verified prior to waking up the system. You should select two kinds of PCI Ethernet cards with WOL function. One is Intel and the other is with PME signal supporting. And you can set “PCI PME#... - Page 11 Chapter 1 System Features ATC 6430M Mainboard Function” enabled through “ Power Management Setup” from the BIOS setup screen. Caution: For Wake-On-LAN, the +5V standby line for the power supply should be capable of delivering +5V ± 5% at 720mA. Failure to provide adequate standby current when implementing Wake-On-LAN will damage the power supply.
-
Page 12: Chapter 2 Installation
6430M Mainboard Chapter 2 Installation CHAPTER 2 INSTALLATION 2-1 INSTALLATION PROCEDURE Before installing the computer, please prepare all components such as CPU, DRAM; peripherals such as hard drive, keyboard, CD-ROM and accessories such as cables. Then, install the system as following: - Put CPU / heat sink (refer to Celeron CPU installation guide or see the following setup chapter), and DRAM modules on the mainboard. -
Page 13: Cpu Installation
Chapter 2 Installation 6430M Mainboard 2-2 CPU INSTALLATION This mainboard supports PPGA Socket 370 and Slot 1 processors. The 6430M mainboard has built-in Switching Voltage Regulator to support CPU Vcore autodetection. That is, It is smart enough to detect and recognize the CPU voltage, clock, ratio and enables users to set up the CPU frequency from the BIOS Setup Screen. -
Page 14: System Memory Installation
6430M Mainboard Chapter 2 Installation 2-3 SYSTEM MEMORY INSTALLATION 6430M mainboard provides two 3.3V 168-pin DIMM sockets for system memory expansion from 8MB to 512MB SDRAM. These two DIMMs are arranged to two banks, please refer to page A. Bank/DIMM PC-100 Memory Module Total Memory Bank0/DIMM1... -
Page 15: Intel 810 Driver Installation
2. Put the All-In-One CD into your CD-ROM drive. 3. Choose Intel 810/820 Inf Files on the Autorun main menu. 4. Then follow the instruction on the screen. (INF Files that enable the Intel 810/820 Chipsets to be recognized by listed operating systems.) 2-5 VGA DRIVER INSTALLATION Install Intel 810 AGP Driver For Win95/98/NT 1. -
Page 16: Chapter 3 Award Bios Setup
ATC6430M Mainboard Chapter 3 Award BIOS Setup CHAPTER 3 AWARD BIOS SETUP Award BIOS manufacturer provides access to the system BIOS through the hardware and software on mainboard. The hardware consists of a Flash ROM (4MB in 6430M mainboard) and the software is a group of programs that are installed in the ROMBIOS along with all the other data that should be included into the BIOS. -
Page 17: Update Bios Procedure
Chapter 3 Award BIOS Setup ATC6430M Mainboard 3-1 UPDATE BIOS PROCEDURE 3-1-1 BIOS Update: If the BIOS needs to be updated, you can get a CD with the updated BIOS utility in the package. The CD includes : “awdflash.exe” -- BIOS update utility program “awdflash.doc”... - Page 18 BIOS with a new revision of BIOS that contains the correct stepping data. Intel’s BIOS update API allows just the stepping data within the BIOS to be updated as needed. Mainboards that contain a BIOS with the Intel-defined BIOS update API can be quickly and easily updated, if required, without obtaining a complete BIOS upgrade.
-
Page 19: System Bios Configuration Setup
Chapter 3 Award BIOS Setup ATC6430M Mainboard 3-2 SYSTEM BIOS CONFIGURATION SETUP The following pages explain how to set up the BIOS configuration under the Award BIOS. The SETUP program is stored in the Read-Only-Memory (ROM) on the mainboard. To do the SETUP procedure, press the <Del> key when the system is booting up. - Page 20 ATC6430M Mainboard Chapter 3 Award BIOS Setup Control Key Description UP ARROW Move to the previous item DOWN ARROW Move to the next item LEFT ARROW Move to the item on the left RIGHT ARROW Move to the item on the right...
-
Page 21: Standard Cmos Features
Chapter 3 Award BIOS Setup ATC6430M Mainboard 3-2-1 STANDARD CMOS FEATURES This screen records some basic hardware information, and sets the system clock and error handling. These records can be lost or corrupted if the on-board battery has failed or is weak. - Page 22 ATC6430M Mainboard Chapter 3 Award BIOS Setup IDE Primary Master; Primary Slave Secondary Master; Secondary Slave Press Enter to enter next page for detailed hard drive settings: CMOS Setup Utility – Copyright © 1984-1998 Award Software IDE Primary Master IDE HDD Auto-Detection...
- Page 23 Chapter 3 Award BIOS Setup ATC6430M Mainboard Drive A, Drive B This category identifies the types of floppy disk drive A or drive B that have been installed in the computer. None No floppy drive installed 360K, 5.25 in 5.25“ PC-type 360KB capacity 1.2M, 5.25 in...
-
Page 24: Advanced Bios Features
ATC6430M Mainboard Chapter 3 Award BIOS Setup 3-2-2 ADVANCED BIOS FEATURES This screen is a list of system configuration options. Some of them are defaults required by the mainboard’s design, others depend on the features of your system. CMOS Setup Utility – Copyright © 1984 – 1998 Award Software... - Page 25 Chapter 3 Award BIOS Setup ATC6430M Mainboard CPU L2 Cache ECC Checking If Enabled, this function will do ECC check to CPU L2 Cache automatically. Quick Power On Self Test This category speeds up Power On Self Test while booting. If “Enabled”, BIOS will skip some items under check by POST.
- Page 26 ATC6430M Mainboard Chapter 3 Award BIOS Setup OS Select for DRAM > 64MB This item allows you to access the memory that is over 64MB in OS/2. The choice : Non-OS2, OS2 HDD S.M.A.R.T. Capability Select Enabled if your Hard disk supports S.M.A.R.T.(Safe-Monitoring Analysis and Reporting Technology) function.
-
Page 27: Advanced Chipset Features
Chapter 3 Award BIOS Setup ATC6430M Mainboard 3-2-3 ADVANCED CHIPSET FEATURES This screen controls the setting for the chipset on the mainboard. This chipset manages bus speeds and access to system memory resources. CMOS Setup Utility – Copyright © 1984 – 1998 Award Software... - Page 28 ATC6430M Mainboard Chapter 3 Award BIOS Setup SDRAM CAS Latency Time When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing. The choices: 2,3. “2” gives faster performance and “3” gives more stable performance.
- Page 29 Chapter 3 Award BIOS Setup ATC6430M Mainboard page miss. Open: it will precharge bank during the service of a page miss. RAS-to-CAS Override By CAS# LT: the RAS-to-CAS delay timing will be the same as item of CAS# Latency. Override: the value will be fixed in 2.
-
Page 30: Integrated Peripherals
ATC6430M Mainboard Chapter 3 Award BIOS Setup 3-2-4 INTEGRATED PERIPHERALS This section page includes all the items of IDE hard drive and Programmed Input/Output features. See also Section “Chipset Features Setup”. CMOS Setup Utility – Copyright © 1984 – 1998 Award Software... - Page 31 Chapter 3 Award BIOS Setup ATC6430M Mainboard simpler and faster. Your system supports five modes, 0 - 4, which primarily differ in timing. When Auto is selected, the BIOS will select the best available mode. IDE Primary Master/Slave UDMA; IDE Secondary Master/Slave UDMA Auto, will support the Ultra DMA function.
- Page 32 ATC6430M Mainboard Chapter 3 Award BIOS Setup UART Mode Select This lets you select the Infrared mode. Choices are IrDA, ASKIR, Normal, and SCR. Only when you choose IrDA or ASKIR , the screen will then show “UART2 Duplex Mode’ for you to choose “Full” or “Half”..
-
Page 33: Power Management Setup
Chapter 3 Award BIOS Setup ATC6430M Mainboard 3-2-5 POWER MANAGEMENT SETUP This screen controls the 'green' features of this mainboard. CMOS Setup Utility – Copyright © 1984 – 1998 Award Software Power Management Setup ACPI function Enabled Item Help Power Management... - Page 34 ATC6430M Mainboard Chapter 3 Award BIOS Setup Video Off Method This determines the manner in which the monitor is blanked. V/H SYNC This selection will cause the system to turn off the vertical and + Blank horizontal sync. ports and write blanks to the video buffer.
-
Page 35: Pnp/Pci Configuration
Chapter 3 Award BIOS Setup ATC6430M Mainboard 3-2-6 PNP/PCI CONFIGURATION This screen configures the PCI Bus slots. CMOS Setup Utility – Copyright © 1984-1998 Award Software PnP/PCI Configurations Item Help PNP OS Installed -------------------- Reset Configuration Data Disabled Ø Menu Level Resources Controlled By Auto Select “Yes”... - Page 36 ATC6430M Mainboard Chapter 3 Award BIOS Setup Memory Resources Length...
- Page 37 Chapter 3 Award BIOS Setup ATC6430M Mainboard PCI/VGA Snoop It determines whether the MPEG ISA/VGA cards can work with PCI/VGA or not. Enabled When PCI/VGA working with MPEG ISA/VGA Card Disabled When PCI/VGA not working with MPEG ISA/VGA Card...
-
Page 38: Pc Health Status
ATC6430M Mainboard Chapter 3 Award BIOS Setup 3-2-7 PC Health Status This screen shows your in-use PC Health Condition: CMOS Setup Utility – Copyright © 1984-1998 Award Software PC Health Status Item Help Vcore ------------------- +2.5V +3.3V Ø Menu Level... -
Page 39: Frequency / Voltage Control
Chapter 3 Award BIOS Setup ATC6430M Mainboard 3-2-8 FREQUENCY / VOLTAGE CONTROL This screen controls the 'green' features of this mainboard. CMOS Setup Utility – Copyright © 1984-1998 Award Software Frequency/Voltage Control Auto Detect DIMM/PCI CLK Disabled Item Help CPU/SDRAM/PCI Clock &... -
Page 40: Load Fail-Safe Defaults
ATC6430M Mainboard Chapter 3 Award BIOS Setup 3-2-9 LOAD FAIL-SAFE DEFAULTS When your mainboard has problems and needs to trouble shoot the system, you can use this function. The default values loaded only affect the BIOS Features Setup, Chipset Features Setup, Power Management Setup and PNP/PCI Configuration Setup.