Date And Time; Sntp Is Available, But No Automatic Configuration By Dhcp Server - Siemens HiPath 8000 Administrator's Manual

3.4.3

Date and Time

If the DHCP server in your network provides information about the SNTP server access, the
correct date and time is automatically shown on the phone.
If the DHCP server in your network does not provide an SNTP address, you have to set the
SNTP address manually.
If no SNTP server is available, you have to configure the date and time manually.
3.4.3.1

SNTP is available, but no automatic configuration by DHCP server

Data required
• SNTP IP address: IP address or hostname of the SNTP server.
• Timezone offset: Shift in hours corresponding to the time zone information of the SNTP
server.
Administration via WBM
Date and Time
Administration via Local Phone
|
--- Administration
|
--- Date and Time
|--- SNTP IP address
|
--- Timezone offset
A31003-01010-M11-1-7619, 29/01/2007
HiPath 8000 - OpenStage 60/80, Administrator Manual
administration.fm
Administration
System Settings
3-25