Call Transfer; Transfer On Ring; Transfer On Hangup - Siemens HiPath 8000 Administrator's Manual

administration.fm
Administration
Features - Configuration
3.5.3

Call Transfer

3.5.3.1

Transfer on Ring

If this function is active, a call can be transferred after you have dialled the third participant's
number, but before the third party has answered the call.
Administration via WBM
System > Features > Configuration
3.5.3.2

Transfer on Hangup

This feature applies to the following scenario: While A is talking to B, C calls A. A accepts the
call, so B is on hold and the call between A and C is active. If Transfer on hangup is enabled,
and A goes on-hook, B gets connected to C.
If Transfer on hangup is disabled, C will be released when A hangs up, and A has the possibility
to reconnect to B.
Administration via WBM
System > Features > Configuration
Administration via Local Phone
|
--- Administration
|
--- System
|
--- Features
|
--- Configuration
3-42
A31003-01010-M11-1-7619, 29/01/2007
HiPath 8000 - OpenStage 60/80, Administrator Manual