Siemens HiPath 8000 Administrator's Manual page 90

administration.fm
Administration
Multiline Appearance/Keyset
• „none": To answer a call, the user manually selects a line by pressing its line key before
going off-hook, or by pressing the speaker key. Manual line selection overrides auto-
matic line preferences.
Line action mode determines the consequence for an established connection when the line
key is pressed. If „hold" is selected, the call currently active is set to hold as soon as the line
key is activated. The user has two options: 1) to reconnect to the remote phone by pressing the
line key that corresponds to that call, or 2) to initiate another call from the newly selected line.
If „release" is selected, the previously established call is ended.
If Show Focus is checked, the LED of a line key flutters when the line is in use. If it is not
checked, the line key is lit steady when it is in use.
The Reservation timer sets the period after which the reservation of a line is canceled. A line
is automatically reserved for the keyset whenever the user has selected a line for an outgoing
call and hears a dial tone. The reservation of a line is accomplished by the HiPath 8000 server,
which notifies all the endpoints that share the line to be reserved.
Forward indication activates or deactivates the indication of station forwarding, i. e. the for-
warding function of the HiPath 8000. If activated, the LED of a line key blinks if the station for-
warding function is active for the corresponding.
Data required
• Rollover ring: Determines if a ringtone will signal an incoming call while a call is active.
Value range: „no ring", „alert beep", „alert ring".
• LED on registration: Determines if line LEDs will signal SIP registration.
Value range: „yes", „no".
• Originating line preference: Selects the line to be used for outgoing calls.
Value range: „idle line", „primary", „last", „none".
• Terminating line preference: Determines which line with an incoming call shall be select-
ed for answering.
Value range: „ringing line", „incoming", „incoming PLP", „ringing PLP", „none".
• Line action mode: Determines the consequence for an established connection when the
line key is pressed.
Value range: „hold", „release".
• Show focus: Determines whether the line Key LED blinks or is steady when it is in use.
Value range: „yes", „no".
• Reservation timer: Sets the period after which a line reservation is cancelled.
Value range: „yes", „no".
• Forward indication: Activates or deactivates the indication of station forwarding.
Value range: „yes", „no".
3-54
A31003-01010-M11-1-7619, 29/01/2007
HiPath 8000 - OpenStage 60/80, Administrator Manual