Advertisement
14. If you are installing this kit on a Greensmaster
800 mower with a serial number prior to
230999999, a Greensmaster 1000 mower
with a serial number prior to 229999999, or
a Greensmaster 1600 mower with a serial
number prior to 260001401, install the right,
bedbar-adjuster frame to the side plate with the
bolts and washers you removed previously.
15. Using a 1/2 inch drive ratchet and extension,
install the drive pulley (right-hand threads) to the
reel shaft
(Figure
4
g017188
Figure 20
1. Drive pulley
2. Idler pulley
16. Secure the reel from turning with a wood block.
17. Torque the pulley to 54 to 81 N∙m (40 to 60 ft-lb).
18. Install reel drive belt and check the belt tension
by pressing the belt at the mid span of the
pulleys with 1.5 to 2.5 kg (3 to 5 lb) of force.
The belt should deflect 6 mm (1/4 inch).
Reposition the idler pulley to adjust the belt
tension. Tighten the screws once you achieve
the proper tension.
19. Install the reel-drive-belt cover to the side plate
as follows:
•
Greensmaster 800 mowers—install the reel
drive cover to the side plate with the 4 bolts
you removed previously.
•
Greensmaster 1000/1600 mowers—install
the cover using the upper and lower bolts
removed previously and the weight and new
fasteners as shown in
fastener retainers as required by your local
codes.
20).
3
3. Quick-up lever
4. Micro adjustment knob
Figure
21. Use the
1. Bolt
2. Star washer
8
2
1
Installing the Grooming
Reel
g017188
Parts needed for this procedure:
4
Groomer-shaft clamp
4
Socket-head screw (1/4 x 1-1/4 inches)
1
Groomer reel (obtain separately)
Procedure
1. Obtain a groomer reel appropriate for your
needs and cutting unit; refer to the following
table for a list of groomer reels:
Model Number
04280
04281
04282
04283
04284
04285
04286
04287
04288
04268
04269
04270
04271
04276
10
Figure 21
3. Weight
4. Fastener retainer
Groomer
18 inch groomer, spring steel
18 inch groomer, carbide
18 inch groomer, brush
21 inch groomer, spring steel
21 inch groomer, carbide
21 inch groomer, brush
26 inch groomer, spring steel
26 inch groomer, carbide
26 inch groomer, brush
18 inch soft grooming brush
18 inch stiff grooming brush
21 inch soft grooming brush
21 inch stiff grooming brush
26 inch stiff grooming brush
g020853
Advertisement
