Nat Server-Group - HP MSR Series Command Reference Manual

<Sysname> system-view
[Sysname] acl advanced 3000
[Sysname-acl-ipv4-adv-3000] rule 5 permit ip destination 192.168.0.0 0.0.0.255
[Sysname-acl-ipv4-adv-3000] quit
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] nat server global 3000 inside 10.0.0.172
Related commands
• display nat all
display nat server
•

nat server-group

•
nat server-group
Use nat server-group to create an internal server group.
Use undo nat server-group to remove an internal server group.
Syntax
nat server-group group-number
undo nat server-group group-number
Default
No internal server group exists.
Views
System view
Predefined user roles
network-admin
Parameters
group-number: Assigns an ID to the internal server group. The value range for this argument is 0 to
65535.
Usage guidelines
An internal server group can contain multiple members configured by the inside ip command.
Examples
# Create internal server group 1.
<Sysname> system-view
[Sysname] nat server-group 1
Related commands
• display nat all
display nat server-group
•
• inside ip
nat server
•
227