Option - HP MSR Series Command Reference Manual

undo next-server
Default
No server's IP address is specified in a DHCP address pool.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the IP address of a server.
Usage guidelines
Upon startup, the DHCP client obtains an IP address and the specified server IP address. Then it contacts
the specified server, such as a TFTP server, to get other boot information.
If you use the next-server command multiple times, the most recent configuration takes effect.
Examples
# Specify a server's IP address 10.1.1.254 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] next-server 10.1.1.254
Related commands
display dhcp server pool

option

Use option to customize a DHCP option.
Use undo option to remove a customized DHCP option.
Syntax
option code { ascii ascii-string | hex hex-string | ip-address ip-address&<1-8> }
undo option code
Default
No DHCP option is customized.
Views
DHCP address pool view, DHCP option group view
Predefined user roles
network-admin
Parameters
code: Specifies the number of the customized option, in the range of 2 to 254, excluding 50 through 54,
56, 58, 59, 61, and 82.
ascii ascii-string: Specifies an ASCII string of 1 to 255 characters as the option content.
73