Display Arp Ip-Address - HP MSR Series Command Reference Manual

Layer 3 ip services command reference (v7)
Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

[No Vrf]
192.168.0.39
[No Vrf]
22.1.1.1
[No Vrf]
# Display the number of all ARP entries.
<Sysname> display arp all count
Total number of entries : 5
Table 1 Command output
Field
IP Address
MAC Address
VLAN
Interface
Aging
Type
Vpn Instance
NickNameRb
Total number of entries
Related commands
arp static
reset arp

display arp ip-address

Use display arp ip-address to display the ARP entry for an IP address.
0x0000
0012-a990-2241
1
0x0000
000c-299d-c041
10
0x0000
Description
IP address in an ARP entry.
MAC address in an ARP entry.
ID of the VLAN to which the ARP entry belongs. This field displays N/A in either
of the following situations:
The ARP entry is an unresolved short static ARP entry.
The output interface of the ARP entry does not belong to the VLAN.
Output interface in an ARP entry. If the ARP entry is an unresolved short static
ARP entry, this field displays N/A.
Aging time for a dynamic ARP entry in minutes. N/A means unknown aging time
or no aging time.
ARP entry type:
D—Dynamic.
S—Static.
O—OpenFlow.
R—Rule.
M—Multiport. The device does not support this type in the current software
version.
I—Invalid.
Name of VPN instance. [No Vrf] is displayed if no VPN instance is configured
for the ARP entry.
Nickname of the ARP entry. The nickname is a string of four hexadecimal
numbers, for example, 0x012a.
For more information about the nickname, see Trill Configuration Guide.
Number of ARP entries.
GE2/0/3
N/A
9
20
D
N/A
M

Advertisement

Table of Contents
loading

Table of Contents