HP MSR Series Command Reference Manual page 45
Layer 3 ip services
command reference (v7)
Hide thumbs
Also See for MSR Series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Usage guidelines
Information displayed by the command includes the state of the physical and link layer protocols, IP
address, and interface descriptions.
If you do not specify the interface type and interface number, the command displays brief IP
configuration for all Layer 3 interfaces.
If you specify only the interface type, the command displays brief IP configuration for all Layer 3
interfaces of the specified type.
If you specify both the interface type and interface number, the command displays brief IP configuration
for the specified interface.
Examples
# Display brief IP configuration for GigabitEthernet interfaces.
<Sysname> display ip interface gigabitethernet brief
*down: administratively down
(s): spoofing
Interface
GE2/0/1
<Sysname> display ip interface gigabitethernet brief description
*down: administratively down
(s): spoofing
Interface
GE2/0/1
Table 5 Command output
Field
*down: administratively
down
(s) : spoofing
Interface
Physical
Protocol
IP Address
(l): loopback
Physical Protocol IP Address
up
(l): loopback
Physical Protocol IP Address
up
Description
The interface is administratively shut down with the shutdown command.
Spoofing attribute of the interface. It indicates that an interface might have no link
present even when its link layer protocol is up or the link is established only on
demand.
Interface name.
Physical state of the interface:
•
*down—The interface is administratively shut down with the shutdown
command.
•
down—The interface is administratively up but its physical state is down
(possibly because of poor connection or line failure).
•
up—Both the administrative and physical states of the interface are up.
Link layer protocol state of the interface:
•
down—The protocol state of the interface is down.
•
down(l)—The protocol state of the interface is down (loopback).
•
up—The protocol state of the interface is up.
•
up(l)—The protocol state of the interface is up (loopback).
•
up(s)—The protocol state of the interface is up (spoofing).
IP address of the interface. If no IP address is configured, this field displays hyphens
(--).
up
5.5.5.1
up
5.5.5.1
31
Description
Link to CoreRo...
Description
Link to CoreRouter
Advertisement
Table of Contents
