Dhcp Relay Client-Information Record; Dhcp Relay Client-Information Refresh - HP MSR Series Command Reference Manual
Layer 3 ip services
command reference (v7)
Hide thumbs
Also See for MSR Series:
- Configuration manual (889 pages) ,
- Command reference manual (684 pages) ,
- Wan access configuration manual (293 pages)
Table of Contents
Advertisement
Parameters
time: Sets the aging time for MAC address check entries in seconds, in the range of 30 to 600.
Usage guidelines
This command takes effect only after you execute the dhcp relay check mac-address command.
Examples
# Set the aging time to 60 seconds for MAC address check entries on the DHCP relay agent.
<Sysname> system-view
[Sysname] dhcp relay check mac-address aging-time 60
dhcp relay client-information record
Use dhcp relay client-information record to enable recording client information in relay entries. A relay
entry contains information about a client such as the client's IP and MAC addresses.
Use undo dhcp relay client-information record to disable the function.
Syntax
dhcp relay client-information record
undo dhcp relay client-information record
Default
The DHCP relay agent does not record client information in relay entries.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Disabling recording of client information deletes all recorded relay entries.
Client information is recorded only when the DHCP relay agent is configured on the gateway of DHCP
clients.
Examples
# Enable recording of relay entries on the relay agent.
<Sysname> system-view
[Sysname] dhcp relay client-information record
Related commands
dhcp relay client-information refresh
•
dhcp relay client-information refresh enable
•
dhcp relay client-information refresh
Use dhcp relay client-information refresh to set the interval at which the DHCP relay agent periodically
refreshes relay entries.
Use undo dhcp relay client-information refresh to restore the default.
84
Advertisement
Table of Contents
