Display Nat Server - HP MSR Series Command Reference Manual

Table 40 Command output
Field
Port block group
Port range
Block size
Local IP address information
Global IP pool information
Start address
End address
VPN instance
Related commands
nat port-block-group

display nat server

Use display nat server to display NAT Server configuration.
Syntax
display nat server
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# (Centralized devices in standalone mode.) Display NAT Server configuration.
<Sysname> display nat server
NAT internal server information:
Totally 3 internal servers.
Interface: GigabitEthernet2/0/1
Protocol: 6(TCP)
Global IP/port: 50.1.1.1/23
Local IP/port : 192.168.10.15/23
Config status : Active
Interface: GigabitEthernet2/0/2
Protocol: 6(TCP)
Description
ID of the NAT port block group.
Port range for the public IP addresses.
Number of ports in a port block.
Information about private IP addresses.
Information about public IP addresses.
Start IP address of a private or public IP address range. If no start IP
address is specified for the address range, this field displays hyphens
(---).
End IP address of a private or public IP address range. If no end IP
address is specified for the address range, this field displays hyphens
(---).
VPN to which the private IP address range belongs. If no VPN instance
is specified for the address range, this field displays hyphens (---).
189