<Sysname> system-view
[Sysname] vam client enable
# Enable VAM client abc.
<Sysname> system-view
[Sysname] vam client enable name abc
Related commands
client enable
vam client name
Use vam client name to create a VAM client and enter its view. If the specified VAM client already exists,
this command opens the VAM client view.
Use undo vam client name to remove a VAM client.
Syntax
vam client name client-name
undo vam client name client-name
Default
No VAM client is configured.
Views
System view
Predefined user roles
network-admin
Parameters
client-name: Specifies a VAM client by its name, a case-insensitive string of 1 to 63 characters that can
include only letters, digits, and dots (.).
Examples
# Create VAM client abc and enter its view.
<Sysname> system-view
[Sysname] vam client name abc
[Sysname-vam-client-abc]
ADVPN tunnel commands
advpn ipv6 network
Use advpn ipv6 network to configure a private IPv6 network for an IPv6 ADVPN tunnel interface.
Use undo advpn ipv6 network to remove a private IPv6 network from an IPv6 ADVPN tunnel interface.
Syntax
advpn ipv6 network prefix prefix-length [ preference preference-value ]
undo advpn ipv6 network prefix prefix-length
525