Reset Ipv6 Nd Suppression Xconnect-Group; Reset Ipv6 Neighbors - HP MSR Series Command Reference Manual

Examples
# Enable common ND proxy on interface GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] proxy-nd enable
Related commands
local-proxy-nd enable

reset ipv6 nd suppression xconnect-group

Use reset ipv6 nd suppression xconnect-group to clear ND suppression entries.
Syntax
reset ipv6 nd suppression xconnect-group [ name group-name ]
Views
User view
Predefined user roles
network-admin
Parameters
name group-name: Specifies a cross-connect group by its name, a case-sensitive string of 1 to 31
characters excluding hyphens (-).
Examples
# Clear ND suppression entries on the device.
<Sysname> reset ipv6 nd suppression xconnect-group
Related commands
display ipv6 nd suppression xconnect-group

reset ipv6 neighbors

Use reset ipv6 neighbors to clear IPv6 neighbor information.
Syntax
Centralized devices in standalone mode:
reset ipv6 neighbors { all | dynamic | interface interface-type interface-number | static }
Distributed devices in standalone mode/centralized devices in IRF mode:
reset ipv6 neighbors { all | dynamic | interface interface-type interface-number | slot slot-number |
static }
Distributed devices in IRF mode:
reset ipv6 neighbors { all | dynamic | interface interface-type interface-number | chassis
chassis-number slot slot-number | static }
Views
User view
372