OSPF information
The following table describes the OSPF commands.
Table 32 OSPF information commands
Command
show ip ospf general-information
show ip ospf area information [<0-2>]
show ip ospf interface
show ip ospf area-virtual-link
information
show ip ospf neighbor
show ip ospf summary-range <0-2>
show ip ospf summary-range-nssa <0-2>
show ip ospf routes
show ip ospf information
Usage
Displays general OSPF information.
Command mode: All except User EXEC
Displays area information for a particular area index. If no
parameter is supplied, it displays area information for all the
areas.
Command mode: All except User EXEC
Displays interface information.
Command mode: All except User EXEC
Displays information about all the configured virtual links.
Command mode: All except User EXEC
Displays the status of all the current neighbors.
Command mode: All except User EXEC
Displays the list of summary ranges belonging to non-NSSA
areas.
Command mode: All except User EXEC
Displays the list of summary ranges belonging to NSSA
areas.
Command mode: All except User EXEC
Displays OSPF routing table.
Command mode: All except User EXEC
Displays the OSPF information.
Command mode: All except User EXEC
N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 40