Accessing The Aos Cli - NEC N8406-023 Command Reference Manual

Accessing the AOS CLI

To access the AOS CLI, enter the following command from the ISCLI, and reload the switch:
>> Switch(config)# boot cli-mode aos
The default command-line interface for this switch is the AOS CLI. To access the ISCLI, enter the following
command and reset the switch:
Main# boot/mode iscli
Users can select the CLI mode upon login, if the following command is enabled:
boot cli-mode prompt
Only an administrator connected through the console port can view and enable the prompt command. When
prompt is enabled, the first user to log in can select the CLI mode. Subsequent users must use the selected CLI
mode, until all users have logged out.
N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 151