Table of Contents
Advertisement
IGMP static multicast router configuration
The following table describes the Static Multicast Router Configuration commands.
NOTE: When you configure a static multicast router on a VLAN, the process of learning multicast routers is
disabled for that VLAN.
Table 141 IGMP Static Multicast Router commands
Command
ip igmp mrouter <port number>
<1-4094> <1-2>
no ip igmp mrouter <port number>
<1-4094> <1-2>
show ip igmp mrouter
IGMP filtering configuration
The following table describes the IGMP Filter Configuration commands.
Table 142 IGMP Filtering commands
Command
ip igmp filtering
no ip igmp filtering
show ip igmp filtering
IGMP filter definition
The following table describes the IGMP Filter Definition commands.
Table 143 IGMP Filter Definition commands
Command
ip igmp profile <1-16> range <IP
multicast address> <IP multicast
address>
ip igmp profile <1-16> action
{allow|deny}
ip igmp profile <1-16> enable
no ip igmp profile <1-16> enable
no ip igmp profile <1-16>
show ip igmp profile <1-16>
Description
Selects a port/VLAN combination on which the static multicast
router is connected, and configures the IGMP version (1 or 2) of the
multicast router.
Command mode: Global configuration
Removes a static multicast router from the selected port/VLAN
combination.
Command mode: Global configuration
Displays the current IGMP Static Multicast Router parameters.
Command mode: All except User EXEC
Description
Enables IGMP filtering globally.
Command mode: Global configuration
Disables IGMP Filtering globally. This is the default.
Command mode: Global configuration
Displays the current IGMP Filtering parameters.
Command mode: All except User EXEC
Description
Configures the range of IP multicast addresses for this filter.
Enter the first IP multicast address of the ranger, followed by the
second IP multicast address of the range.
Command mode: Global configuration
Allows or denies multicast traffic for the IP multicast addresses
specified.
Command mode: Global configuration
Enables this IGMP filter.
Command mode: Global configuration
Disables this IGMP filter. This is the default.
Command mode: Global configuration
Deletes this filter's parameter definitions.
Command mode: Global configuration
Displays the current IGMP filter.
Command mode: All except User EXEC
N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 127
Advertisement
Table of Contents
