Port Configuration; Section 4 Port Configuration - NEC SMB8000 Manual

Issue 3.0
___________________________________________________________________________________
S 4 P
ECTION ORT
The port configuration page displays the settings for each of the Switches ports.
Port – The number of the port.
Admin State – The port can be taken offline by selecting the disable option. When
enabled the port can be accessed as normal.
Auto Negotiation – This is the ports current setting of the ports Autonegotiation
feature.
Default Speed – The port connection speed can be set only when auto-negotiation is
disabled.
Maximum Capability – Indicates that the ports speeds and duplex mode setting can
be set.
10 Half – Indicates that the port is advertising 10Mbps half duplex mode setting
10 Full – Indicates that the port is advertising 10Mbps full duplex mode setting
100 Half – Indicates that the port is advertising 100Mbps half duplex mode setting
100 Full – Indicates that the port is advertising 100Mbps full duplex mode setting
1000 – Indicates that the port is advertising 1000Mbps full duplex mode setting
Click Apply to accept the changes.
Select the Link Status – to return to the real time display of current connected
Ethernet devices.
Click Refresh if your web page cannot be displayed or to ensure the latest version of
the page is displayed.
___________________________________________________________________________________
5 - 6
C
ONFIGURATION
Gigabit PoE Switch Web Manager
SMB8000