Ipv6 Mpls L3Vpn Configuration Examples; Configuring Ipv6 Mpls L3Vpns - HP FlexNetwork 10500 Series Configuration Manual

Task
Display BGP VPNv6 peer information.
Display BGP VPNv6 routes.
Display incoming labels for all BGP
VPNv6 routes.
Display outgoing labels for all BGP
VPNv6 routes.
Display BGP VPNv6 address family
update group information.
Display OSPFv3 sham link information.
For more information about the display ipv6 routing-table, display bgp group vpnv6, display
bgp peer vpnv6, and display bgp update-group vpnv6 commands, see Layer 3—IP Routing
Command Reference.

IPv6 MPLS L3VPN configuration examples

Configuring IPv6 MPLS L3VPNs

Network requirements
CE 1 and CE 3 belong to VPN 1. CE 2 and CE 4 belong to VPN 2.
VPN 1 uses route target attributes 111:1. VPN 2 uses route target attributes 222:2. Users of different
VPNs cannot access each other.
Run EBGP between CE and PE switches to exchange VPN routing information.
PEs use OSPF to communicate with each other and use MP-IBGP to exchange VPN routing
information.
Command
display bgp [ instance instance-name ] peer vpnv6
[ ipv4-address mask-length | { ipv4-address | group-name
group-name } log-info | [ ipv4-address ] verbose ]
display bgp [ instance instance-name ] routing-table vpnv6
[ [ route-distinguisher route-distinguisher ] [ ipv6-address
prefix-length [ advertise-info ] | as-path-acl as-path-acl-number |
community-list { { basic-community-list-number |
comm-list-name } [ whole-match ] | adv-community-list-number } ]
| peer ipv4-address { advertised-routes | received-routes }
[ ipv6-address prefix-length | statistics ] | statistics ]
display bgp [ instance instance-name ] routing-table vpnv6
inlabel
display bgp [ instance instance-name ] routing-table vpnv6
outlabel
display bgp [ instance instance-name ] update-group vpnv6
[ ipv4-address ]
display ospfv3 [ process-id ] [ area area-id ] sham-link
[ verbose ]
287