Mpls L2Vpn Configuration Examples; Configuring A Static Pw - HP FlexNetwork 10500 Series Configuration Manual

Task
(In IRF mode.) Display cross-connect
forwarding information.
Display L2VPN PW information.
Display PW class information.
Display Ethernet service instance
information.
Display cross-connect group
information.
Display L2VPN label block
information.
Display BGP L2VPN peer group
information.
Display L2VPN label block
information discovered by BGP.
Display BGP L2VPN peer
information.
Display BGP L2VPN update group
information.
Reset BGP sessions for L2VPN.
For more information about the display bgp group l2vpn, display bgp peer l2vpn, display bgp
update-group l2vpn, and reset bgp l2vpn commands, see Layer 3—IP Routing Command
Reference.

MPLS L2VPN configuration examples

Configuring a static PW

Network requirements
Create a static PW between PE 1 and PE 2 over the backbone to allow communication between CE
1 and CE 2 within VLAN 10.
Create Ethernet service instance 10 on GigabitEthernet 1/0/1 to match packets with an outer VLAN
ID of 10 on each PE.
Command
display l2vpn forwarding { ac | pw } [ xconnect-group
group-name ] [ chassis chassis-number slot slot-number ]
[ verbose ]
display l2vpn pw [ xconnect-group group-name ] [ protocol { bgp
| ldp | static } ] [ verbose ]
display l2vpn pw-class [ class-name ]
display l2vpn service-instance [ interface interface-type
interface-number [ service-instance instance-id ] ] [ verbose ]
display l2vpn xconnect-group [ name group-name ] [ verbose ]
display l2vpn bgp [ peer ip-address | local ] [ xconnect-group
group-name ] [ verbose ]
display bgp [ instance instance-name ] group l2vpn
[ group-name group-name ]
display bgp [ instance instance-name ] l2vpn signaling [ peer
ip-address { advertised | received } [ statistics ] |
route-distinguisher route-distinguisher [ site-id site-id
[ label-offset label-offset [ advertise-info ] ] ] | statistics ]
display bgp [ instance instance-name ] peer l2vpn [ ip-address
mask-length | group-name group-name log-info | ip-address
{ log-info | verbose } | verbose ]
display bgp [ instance instance-name ] update-group l2vpn
[ ip-address ]
reset bgp [ instance instance-name ] { as-number | ip-address
[ mask-length ] | all | external | group group-name | internal } l2vpn
339