Establishing An Inter-As Mpls Te Tunnel With Rsvp-Te - HP FlexNetwork 10500 Series Configuration Manual

Hide thumbs Also See for FlexNetwork 10500 Series:
Table of Contents

Advertisement

Last 300 seconds output rate: 6 bytes/sec, 48 bits/sec, 0 packets/sec
Input: 0 packets, 0 bytes, 0 drops
Output: 177 packets, 11428 bytes, 0 drops
# Display detailed information about the MPLS TE tunnel on Switch A.
[SwitchA] display mpls te tunnel-interface
Tunnel Name
Tunnel State
Tunnel Attributes
LSP ID
Admin State
Ingress LSR ID
Signaling
Resv Style
Tunnel mode
Reverse-LSP name
Reverse-LSP LSR ID
Class Type
Reserved Bandwidth
Setup Priority
Affinity Attr/Mask
Explicit Path
Backup Explicit Path : -
Metric Type
Record Route
FRR Flag
Backup Bandwidth Flag: Disabled
Backup Bandwidth
Bypass Tunnel
Route Pinning
Retry Limit
Reoptimization
Backup Type
Auto Bandwidth
Min Bandwidth
Collected Bandwidth
# Execute the display ip routing-table command on Switch A. The output shows a static route entry
with interface Tunnel 1 as the output interface. (Details not shown.)

Establishing an inter-AS MPLS TE tunnel with RSVP-TE

Network requirements
Switch A and Switch B are in AS 100. Switch C and Switch D are in AS 200. AS 100 and AS 200 use
OSPF as the IGP.
Establish an EBGP connection between ASBRs Switch B and Switch C. Redistribute BGP routes
into OSPF and OSPF routes into BGP, so that a route is available between AS 100 and AS 200.
Use RSVP-TE to establish an MPLS TE tunnel from Switch A to Switch D to transmit data between
the two IP networks. The tunnel requires a bandwidth of 2000 kbps. The maximum bandwidth of the
: Tunnel 1
: Up (Main CRLSP up, Shared-resource CRLSP down)
:
: 23331
Tunnel ID
: Normal
: 1.1.1.9
Egress LSR ID
: RSVP-TE
Static CRLSP Name
: SE
: -
: -
: -
Reverse-LSP Tunnel ID: -
: CT0
Tunnel Bandwidth
: 2000 kbps
: 7
Holding Priority
: 0/0
: -
: TE
: Disabled
Record Label
: Disabled
Bandwidth Protection : Disabled
Backup Bandwidth Type: -
: -
: No
: Disabled
: 10
Retry Interval
: Disabled
Reoptimization Freq
: None
Backup LSP ID
: Disabled
Auto Bandwidth Freq
: -
Max Bandwidth
: -
114
Auto Created
: 1
: 4.4.4.9
: -
: 2000 kbps
: 7
: Disabled
: No
: 2 sec
: -
: -
: -
: -

Advertisement

Table of Contents
loading

Table of Contents