Mce Configuration Task List; Configuring Vpn Instances - HP FlexNetwork 10500 Series Configuration Manual

Figure 111 Network diagram for the MCE feature
VPN 1
Site 1
GE1/0/1
GE1/0/2
VPN 2
Site 2
You can configure static routes, RIP, OSPF, IS-IS, EBGP, or IBGP between an MCE and a VPN site
and between an MCE and a PE.
NOTE:
To implement dynamic IP assignment for DHCP clients in private networks, you can configure
DHCP server or DHCP relay agent on the MCE. When the MCE functions as the DHCP server, the
IP addresses assigned to different private networks cannot overlap.

MCE configuration task list

Tasks at a glance
Configuring VPN
(Required.)
(Required.)
(Optional.)
Configuring routing on an
(Required.)
(Required.)

Configuring VPN instances

VPN instances isolate VPN routes from public network routes and routes among VPNs. This feature
allows VPN instances to be used in network scenarios in addition to MPLS L3VPNs.
All VPN instance configurations are performed on PEs or MCEs.
GE1/0/3.1
GE1/0/3
GE1/0/3.2
MCE
instances:
Creating a VPN instance
Associating a VPN instance with an interface
Configuring route related attributes for a VPN instance
MCE:
Configuring routing between an MCE and a VPN site
Configuring static routing between an MCE and a PE
P
GE1/0/1.1
GE1/0/1
GE1/0/1.2
PE 1
P
424
VPN 2
Site 1
CE
PE 2
PE 3
CE
VPN 1
Site 2