Removing the pinch roller unit.
Prior to performing the following procedure,
removing the cassette mechanism.
1.
Remove the two screws E attaching the pinch roller unit.
Attention:
The pinch roller cap is forcefully fitted to the shaft
of the pinch roller unit. If the pinch roller cap is
taken out by force, the shaft will be broken.
When replacing the pinch roller, it should be
changed as a pinch roller unit itself.
Slide spring
Cassette mechanism
R/P Head
Pinch roller unit
(Fig. 4)
E
Fig.4
MX-G68V/MX-G65V
Pinch roller cap
Pinch roller
Slide spring
Stopper
1-15