Front Panel Leds And Buttons - HP ProLiant DL360 G7 Maintenance And Service Manual

Front panel LEDs and buttons

Item Description
1 UID LED/button
2 Health LED
3 Power On/Standby button
and system power LED
Status
Blue = Identification is activated.
Flashing blue = System is being managed remotely.
Off = Identification is deactivated.
Green = System health is normal.
Amber = System health is degraded. To identify the component in
a degraded state, see "Systems Insight Display LEDs (on page
71)".
Red = System health is critical. To identify the component in a
critical state, see "Systems Insight Display LEDs (on page 71)".
Off = System health is normal (when in standby mode).
Green = System is on.
Amber = System is in standby, but power is still applied.
Off = Power cord is not attached, power supply failure has
occurred, no power supplies are installed, facility power is not
available, or the power button cable is disconnected.
Component identification 66