Front Panel Leds And Buttons - HP ProLiant DL20 Gen10 User Manual

Front panel LEDs and buttons

Front panel LEDs and buttons
Item Item Description Description
1 Health LED
2 NIC status LED
3 Power On/Standby
button and system
1
power LED
4 UID button/LED
1
When the LEDs described in this table flash simultaneously, a power fault has occurred. For more information, see
Front panel LED power fault codes
.
2
If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
3
Facility power is not present, power cord is not attached, no power supplies are installed, or power supply failure has occurred.
Status Status
1
Solid green
Flashing green
Flashing amber
Flashing red
1
Solid green
Flashing green
Off
Solid green
Flashing green
Solid amber
Off
1
Solid blue
Flashing blue
Off
Definition Definition
Normal
iLO is rebooting
2
System degraded
2
System critical
Linked to network
Network active
No network activity
System on
Performing power-on sequence
System in standby
3
No power present
Activated
1 flash per second = Remote management or
firmware upgrade in progress
4 flashes per second = iLO manual reboot
sequence initiated
8 flashes per second = iLO manual reboot
sequence in progress
Deactivated
Front panel LEDs and buttons 12