Pcie Riser Board; Pci-X Riser Board - HP ProLiant DL360 G7 Maintenance And Service Manual

PCIe riser board

To remove the component:
Power down the server (on page 25).
1.
Extend the server from the rack (on page 26).
2.
Remove the access panel
3.
If installed, remove the BBWC battery pack or the FBWC capacitor pack
4.
FBWC capacitor
Remove the air baffle
5.
Remove the PCI riser board assembly
6.
Remove all expansion boards
7.
Remove the full-length PCIe riser board from the riser board assembly.
8.
To replace the component, reverse the removal procedure.

PCI-X riser board

To remove the component:
Power down the server (on page 25).
1.
Extend the server from the rack (on page 26).
2.
Remove the access panel
3.
If installed, remove the BBWC battery pack or the FBWC capacitor pack
4.
FBWC capacitor
Remove the air baffle
5.
Remove the PCI riser board assembly
6.
Remove all expansion boards
7.
("Access panel" on page 28).
pack" on page 37).
("Air baffle" on page 38).
("PCI riser board
("Expansion
("Access panel" on page 28).
pack" on page 37).
("Air baffle" on page 38).
("PCI riser board
("Expansion
assembly" on page 38).
boards" on page 39).
assembly" on page 38).
boards" on page 39).
Removal and replacement procedures 40
("BBWC battery pack or
("BBWC battery pack or