HP ProLiant DL360 G7 Maintenance And Service Manual page 54

CAUTION: To avoid damage to the system board:
• Do not touch the processor socket contacts.
Always install the processor socket cover after removing the processor from the socket.
•
Do not tilt or slide the processor when lowering the processor into the socket.
•
CAUTION: To avoid damage to the processor:
Handle the processor only by the edges.
•
Do not touch the bottom of the processor, especially the contact area.
•
Remove the failed system board.
19.
To replace the system board:
Align and install the spare system board in the server before installing the processor.
1.
Prepare the processor socket on the spare system board:
2.
Open the processor retaining latch and the processor socket retaining bracket.
a.
Removal and replacement procedures 54