Load Bios Defaults Option; Load Optimum Settings Option - ECS P6SEP-Me User Manual

PCI IRQ Activated By
This item defines the way that signals on the PCI bus generate interrupts to the
processor. We recommend that you leave this item at the default value Level.
PCI IDE IRQ Map To
Primary IDE INT#
Secondary IDE INT#
These items selects if you are using PCI IDE channels or ISA-bus IDE channels. If
you are using PCI IDE, two other fields appear which show the mapping of the
primary and secondary channels. Leave this item at the default value unless you have
disabled the onboard IDE channels and are using an ISA bus IDE card.
Assign IRQ For USB
When this item is enabled, the system can assign an IRQ to devices connected on the
USB port.

Load BIOS Defaults Option

This option displays a dialog box which allows you to install BIOS defaults for all
appropriate items in the whole setup utility. Press the Y key and then the Enter key to
install the defaults. Press the N key and then Enter to not install the defaults. The
BIOS defaults do not place great demands on the system and are generally very stable.
If your system is not functioning correctly, you might like to install the BIOS defaults
as a first step in getting your system working properly again. If you only want to
install BIOS defaults for a specific option, select and display that option, and then
press the F6 key.

Load Optimum Settings Option

This option displays a dialog box which allows you to install optimum defaults for all
appropriate items in the whole setup utility. Press the Y key and then the Enter key to
install the defaults. Press the N key and then Enter to not install the defaults. The
optimum defaults can place some demands on the system that are greater than the
performance level of the components, such as the processor and the memory. You
could cause fatal errors or recurring instability of you install the setup defaults when
your hardware does not support it. If you only want to install setup defaults for a
specific option, select and display that option, and then press the F7 key.
Default: Level
Default: PCI-AUTO
Default: A
Default: B
Default: Enabled
33