Checklist; Standard Items; Optional Items; Recommendations - ECS P6BAP-Me User Manual

CPU to PCI Write Buffer
PCI Dynamic Bursting
PCI Master 0 WS Write
PCI Delay Transaction
PCI#2 Access #1 Retry
All of these five items determine how the system carries out read/write
operations over the PCI bus. These items are determined by the system
hardware and chipset, so you should leave these items at the manufacturer's
defaults.
AGP Master 1 WS Write
AGP Master 1 WS Read
These two items determine how the system carries out read/write operations
over the AGP bus. These items are determined by the system hardware and
chipset, so you should leave these items at the manufacturer's defaults.
Assign IRQ for USB
If this item is enabled, an IRQ will be assigned to the system's USB ports.
Assign IRQ for VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system.

Load BIOS Defaults Option

This option opens dialog box that lets you install BIOS defaults for all
appropriate items in the whole setup utility. Press the Y key and then
Enter to install the defaults. Press the N key and then Enter to not install
the defaults. The BIOS defaults place no great demands on the system
and are generally stable. If your system is not functioning correctly, try
installing the BIOS defaults as a first step in getting your system working
properly again. If you only want to install BIOS defaults for a specific
option, select and display that option, and then press the F6 key.

Load Optimum Settings Option

This option opens dialog box that lets you install optimum defaults for all
appropriate items in the whole setup utility. Press the Y key and then
Enter to install the defaults. Press the N key and then Enter to not install
the defaults. The setup defaults place demands on the system that may
be greater than the performance level of the components, such as the
CPU and the memory. You can cause fatal errors or instability if you
install the setup defaults when your hardware does not support them. If
you only want to install setup defaults for a specific option, select and
display that option, and then press the F7 key.
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Disabled
Default: Enabled
Default: Disabled
Default: Enabled
Default: Enabled
49