ECS P6SEP-Me User Manual page 24

10. Locate the three 32-bit PCI expansion slots and the 8/16 bit ISA expansion slot.
Install optional 32-bit PCI cards into the PCI slots. Install an optional 8/16-bit card
into the ISA slot. The ISA slot is shared with the PCI3 slot just above it. This means
that you can only use one of these slots, but not both together.
1
PS2KBM1
1. PS2KBM1 is a stack of two PS/2 mini-DIN ports. The upper port can be used by a
PS/2 mouse or pointing device. The lower port can be used by a PS/2 keyboard.
2. LPT1 is a parallel port that can be used by printers or other parallel communications
devices. The system identifies the parallel port as LPT1.
3. The upper 15-pin port J2 is a game/MIDI port. You can use this port to connect a
joystick or a MIDI device to your system
4. The lower part of J2 is three audio jacks. The left side jack is for a stereo line out
signal. The middle jack is for a stereo line in signal. The right side jack is for a
microphone.
5. VGA1 is an external monitor port Use this port to connect your system to a monitor
that supports VGA or extended VGA resolutions.
6. COM1 is a serial port that can be used by serial devices such as a mouse, a
fax/modem and so on. This serial port is identified by the system as COM1/3.
7. USB1 is a stack of two Universal Serial Bus ports. Use these ports to connect to
USB devices.
18
1
1 1
LPT1
USB1
COM1
PCI1
PCI2
PCI3
J2
J2
VGA1
ISA1