Monitor Applications; Standard; To Admit A Patient; To Discharge A Patient - GE DASH 3000 V5 Quick Reference Manual

Monitor Applications

The bedside monitor can be used in
four different ways depending on
hospital need. Differences between
each application will be apparent in
the monitor's admit menu.

Standard

This application uses a monitor
mounted in a room. It has only
hardwire capability and does not
accommodate telemetry.

To Admit a Patient

• Select MORE MENUS.
• Select ADMIT MENU.
• Select ADMIT PATIENT.
NOTE: The Admit key, on the front of the monitor, can also be
used to admit the monitor.

To Discharge a Patient

• Remove all ECG leads from
the patient.
• Select MORE MENUS.
• Select ADMIT MENU.
• Select DISCHARGE
PATIENT.
• Turn the Trim Knob to move
the cursor in front of
Discharge and press to select.
• A message DISCHARGED
and ALL ALARMS OFF will
appear on the display when
the monitor is in a discharged
mode.
TAB
TRIM
COVER &
NON-TAB
TRIM
COVER &
NON-TAB
TRIM
TAB
TRIM