Setup Procedure - GE DASH 3000 V5 Quick Reference Manual

CapnoFlex LF CO
2
2. Complete the appropriate steps based
on the message appearing in the CO
parameter window.
CALIBRATE SAMPLE LINE
Connect the cannula to the module,
but not the patient.
Select CO parameter window.
2
Select CALIBRATE SAMPLE LINE.
Select READY.
The message "CALIBRATING" will be displayed.
Connect the cannula to the patient after
"CHECK SAMPLE LINE" message appears.
NOTE: Refer to manufacturers recommendations for cannula application.
Refer to Operators Manual for Any Specific Questions.
!
For Customer Support or Clinical Helpline,
Call: 1-800-558-7044.
CapnoFlex LF CO

Setup Procedure

(continued)
CO Menu with Calibrate Sample Line
2
2
CO
Adapter Cal Message
2
.
CHECK ADAPTER/ADAPTER CAL
The module is ready for use.
Connect the patient sample line and the O
with a male adapter to the module and the patient.
Parameter Window
2
with Check Adapter/
CO Parameter Window
2
with Calibrate Sample
Line Message
tubing
2
TAB
TRIM
COVER &
NON-TAB
TRIM
COVER &
NON-TAB
TRIM
TAB
TRIM